ACS800

ACS800-U2-0210-5+H351+H353 bearing | 400Vac Ratings

Buy Now
Contact Now

Price：	enquiry
Model Number：	ACS800-U2-0210-5+H351+H353
PND：	132
PHD：	90
I2ND：	240
I2HD：	192
I：	384

I	384 Amps
I2ND	240 A
PND	132 KW
I2HD	192 A
PHD	90 KW
FS	R7
TEE	With (Included)

No.	PND	PHD	I2ND	I2HD	I	FS
7219BDB FY	95	1.1	2.1	3500	2700	7219BDBFY
NS250073CLN1PCZ1AL+(6.5)	6.5	-	-	-	-	-
NJ2320EM &	HPS	100	2.5	2.5	3.0	3.0
240/1060CAMK30E4	240/1060CAMK30E4	2410.00	1500	2.4	3.6	2.4
LM 203242N F UU	Both side Seal (UU)	Stainless	LM 203242N F UU	Plastic	20	-
NNU49/500	500	5.0	NNU49/500	162.00	860	730
4T-15101/15243	25.400	2.0	0.8	4T-15101/15243	0,3	61.912
2303	22000	30000	3.550	14.300	2303	47.000
7938DT	190	1.00	2.0	7938	5.100	3 200
47680R/20	33.338	76.200	3.2	0.8	3700	2700

ACS800-U2-0100-2+H351+H353 bearing | 240Vac Ratings

Buy ACS800-U2-0100-2+H351+H353 240Vac Ratings - Free Standing Drives w/ Enclosure Extension - 208, 220, direct from Loyal Industries.

ABB ACS800-U2 Drive - Industrial Drive - ABB Drive Store

The ACS800-U2 VFD is a free standing single drive that is compact enough for small spaces. This ABB drive includes a choke for harmonics filtering, ...

Hardware manual - ACS800-37LC Drives (55 to 5200 kW)

ACS800 IGBT Supply Control Program Firmware Manual ... Requirements for motor insulation and bearings and drive filters . ... ACS800-37LC-0210-5.

ABB industrial drives ACS800, single drives, 0.75 to 6000 hp

The ACS800-PC offers a variety of options for factory installation including; I/O expansion, line contactor with E-Stop, and aux motor starter for motor cooling ...

Resistor Braking | ABB ACS800-37-0060-3 Hardware manual (page ...

Check out and print abb acs800-37-0060-3 hardware manual for free. ACS800-37 series Drives (55 to 2700 kW / 75 to 3000 HP). ... ACS800-37-0210-5. NBRA-658.

ABB ACS800-37-0060-3 Hardware Manual - ManualsLib

Also for: Acs800-37-0100-3, Acs800-37-0210-3, Acs800-37-0070-3, ... Selection Alternatives Cabling H351 = Top entry H353 = Top exit H358 = US/UK ...

EN / ACS800-17 Drives Hardware Manual

After switching off the input power, always wait for 5 min to let the intermediate circuit capacitors discharge before you start working on the drive,.

ACS800-02/U2 Hardware Manual

Never work on the drive, motor cable or motor when main power is applied. After disconnecting the input power, always wait for 5 min to let the intermediate.