JTEKT Corporation(Koyo)
- Needle roller bearings
- HK 1212 BND 001 - Drawn cup needle roller bearings
HK 1212 bearing | Needle roller bearings
Price: | enquiry |
Model Number: | HK 1212 |
R: | HK 1212 |
ORDER: | 18000 |
NO: | 16000 |
FW: | 0.850 |
D: | 7.350 |
DESIGNATION | HK 1212 |
FW | 12.000 mm |
D | 18.000 mm |
C | 12.000 mm |
LOAD1 | 6.270 kN |
LOAD2 | 7.350 kN |
LOAD3 | 0.850 kN |
SPEED1 | 16000 r/min |
SPEED2 | 18000 r/min |
No. | R | ORDER | NO | FW | D | CU |
---|---|---|---|---|---|---|
HR32206C | 0.60 | _ | 30 | 1.0 | 1.0 | 1.0 |
3MM9121WI | 2.00 mm0.079 in | 2.00 mm0.079 in | 14200 rpm | 7100 rpm | 16.668750 mm21/32 in | METRIC |
NUP2208ET7 | Standard | 40 | 1.0 | 1.0 | 1.1 | 1.1 |
767D/752 | 3.9979 in101.547 mm | 755 | 0.060 in1.50 mm | Spacer shows standard nominal .01 radii, actual bearing may vary | Imperial | 6.3750 in161.925 mm |
AOH 3056 | HM 3060 | HMV 60 E | AOH 3056 | 260.000 | 280.000 | 139.000 |
23268B | 23268B | 300.000 | 0.0 | 340 | 6.0 | 630 |
RB30040 | RB30040 | - | - | - | - | - |
VCJT 1 5/8 | 4.914 lb2.229 Kg | 179.4 mm7.063 in | 111.1 mm4.374 in | 4600 lbf20500 N | 1 5/8 in41.3 mm | Standard |
E/P4B/TRB/75MM/ECC | 2.26 | 1.87 | 0.7 | 0.87 | 29 lb | 0883450504447 |
LMH 6L | LMH 6L | - | - | - | - | - |
SKF HK 1212 12mm I.D Needle Roller Bearing, 18mm O.D
SKF Drawn cup needle roller bearings have a deep drawn, thin-walled outer ring with open ends (indicated by the HK prefix).,They are characterised by very low ...
HK 1212 SKF SKF - Bearing: needle roller | thin walled - TME
Jan 10, 2017 — SKF HK 1212 SKF | Bearing: needle roller; thin walled; Øint: 12mm; Øout: 18mm; W: 12mm - This product is available in Transfer Multisort ...
SKF HK 1212 - Needle Non Thrust Roller Bearings - BDI
SKF,HK,1212..,12MM,Bore;,18MM,Outside,Diameter;,Width;,Needle,Roller,Bearing;,Assembly,with,Outer,Ring,-,No,Inner,Ring;,Open;,Not,Self,Aligning;,Retainer; ...
HK 1212 - Needle roller bearings - SKF
Drawn cup needle roller bearings are typically used in applications where the housing bore cannot be used as a raceway for a needle roller and cage assembly ...
INA HK1212 Needle Roller Bearing, Caged Drawn Cup ...
This INA caged drawn cup needle roller bearing has a steel cage and is suitable for applications with high dynamic loads. It has a smaller cross-section than a ...
HK1212 / Product detail / Koyo Bearings (JTEKT)
HK1212 · Specifications (Boundary dimensions ...etc) · Mounting dimensions · Refer. · Technical calculation for this product. · For those who are considering the ...
HK1212 - Drawn cup needle roller bearings - NTN SNR
HK1212 - NTN ; Fw - Under rollers diameter, 12 mm ; D - External diameter, 18 mm ; C - Width of bearing, drawn cup or outer ring, 12 mm ...
HK1212 needle roller bearing TLA-1212 92046-1163
This HK1212 caged drawn cup needle roller bearing has a steel cage and is suitable for applications with high dynamic loads. It has a smaller cross-section than ...
HK1212 Drawn cup needle roller bearing open end
Drawn cup needle roller bearings with open ends HK, to DIN 618/ISO 3245. Add to product comparison ... HK1212. Main Dimensions & Performance Data ...