Bearing accessories

AHX 311 bearing | Withdrawal sleeves

Buy Now
Contact Now

Price：	enquiry
Model Number：	AHX 311
NUT：	KM 12
HNUT：	HMV 12 E
DESIGNATION：	AHX 311
DD1：	50.000
DD：	55.000

DESIGNATION	AHX 311
DD1	50.000 mm
DD	55.000 mm
B1	37.000 mm
B2	40.000 mm
HNUT	HMV 12 E
NUT	KM 12

No.	NUT	HNUT	DESIGNATION	DD1	DD	B2
SDAF 23184K 15/3/4	ER 969-1	A8984	SDAF3184K x 15-3/4	33.7500 in	SDAF23184K15-3/4	14.5 in
24048RHA	3.0	24048RHA	1200	870	360	215
NK19/16A	0.3	NK19/16A	24000	19	27	2.90
E/P4B/TRB/65MM/ECO/ECC	2.63	2.17	0.7	0.87	22.00 lb	0883450506052
SAA209-27FP7	14.0	1 11/16	-	11.0	0.82	5/16-24UNF
SDAF 22622 3/13/16	2.4844 in	LOR 91	1 in	2.5000 in	4	8.0000 in
619/9/ZZ	0.007 Kg	0.300 mm	6.000 mm	20.000 mm	42000 rpm	35000 rpm
YTU SGT 1 3/4	6.95 lb3.15 Kg	141.4 mm5.567 in	120.6 mm4.748 in	4600 lbf20500 N	44.4 mm1.748 in	17.5 mm0.689 in
6930ZZ	150	2.0	2.640	3000	210	85500
FSNL 515-612 + C 2215 K + H 315 E	FSNL 515-612	80	155	FSNL 515-612 + C 2215 K + H 315 E	115	C 2215 K

SKF | AHX 311 | STANDARD ACCESSORIES | Applied

AHX 311 | Online Catalog | Bearings | Products | NOC international

Sleeves, nuts and nut lockings. Withdrawal sleeves. Washers, rings, incl. sleeve rings, nuts and shims. SNR AHX 311, AHX-311, AHX311, AHX311.

Withdrawal Sleeve, AHX (AHX 311) - SKF - MISUMI

Withdrawal Sleeve, AHX of SKF,AHX 311, Check out the variety of ... The AHX 311 is included in our offerings for SKF Adapters for Bearings and our full line ...

AHX 311 | Withdrawal | Sleeves | Accessories | Bearings - BMG

Withdrawal sleeve, 50mm shaft diameter, 37mm length, M60 x 2.0 thread, BTC.

AHX 311 - Withdrawal sleeves - SKF bearing

Model Number: AHX 311; Inner Diameter：50mm Outer Diameter：55mm Width：37mm; Reference speed:- Limiting speed:- Type：Bearings, units and housings Bearing ...

SKF-Bearing AHX 311 - MRO Supply

Weight: 0.4 lb ; Unit of measure: each ; Type, Withdrawal sleeve (threads on thicker end) ; Inner Diameter (mm), 50.000 ; Outer Diameter (mm), 60.000.

AHX 311 - Withdrawal sleeves - SKF

DIMENSIONS ; 37 mm · 40 mm · M 60x2 · 7 mm · 1:12 ; Width · Width sleeve and bearing before sleeve is driven into bore · Thread · Length thread · External taper ...