Bearing accessories

AOH 3168 G bearing | Withdrawal sleeves

Buy Now
Contact Now

Price：	enquiry
Model Number：	AOH 3168 G
NUT：	HM 3172
HNUT：	HMV 72 E
DESIGNATION：	AOH 3168 G
DD1：	320.000
DD：	340.000

DESIGNATION	AOH 3168 G
DD1	320.000 mm
DD	340.000 mm
B1	225.000 mm
B2	234.000 mm
HNUT	HMV 72 E
NUT	HM 3172

No.	NUT	HNUT	DESIGNATION	DD1	DD	B2
15106/245	19.050	26.988	0.80	15106/245	8600	6400
X32321M/Y32321M	81.500 mm3.2087 in	32321M	3.05 mm0.12 in	4.060 mm0.16 in	368.1	METRIC
NNU 4926 B/SPW33	48004800	4300	41.500	390.000	187.000	NNU 4926 B/SPW33
SI 25 ESX-2LS	90.00	72.00	65.000	25.000	18.000	20.000
TAK 1 3/16	3.131 lb1.42 Kg	1.689 in42.90 mm	157.2 mm6.189 in	81.7 mm3.217 in	2530 lbf11300 N	1 3/16 in30.2 mm
1.5x6.8	0.09	6.8	1.5	-	-	-
ACS150-03U-02A4-4	380 - 480	Three	0.75	2.4	1	R0
7226CDT FY	130	3.0	7226CDT FY	4700	3500	230
7048BDB FY	240	1.1	3.0	1400	1000	7048BDBFY
XAA32024X/Y32024X	38.000 mm1.4961 in	32024X	2.03 mm0.08 in	5.080 mm0.2 in	255	METRIC

BGL AOH 3168 G - Hydraulic Withdrawal Sleeve

d1: 320 mm, Shaft Measurements. d: 340 mm, Bearing ID. l: 225 mm, Length. G: Tr 360x5, Nominal Thread. A: 9 mm. G1: 1/4 BSP, Injection Hole Thread ...

SKF-Bearing AOH 3168 G - MRO Supply

SKF-Bearing AOH 3168 G ; Type, Withdrawal sleeve (threads on thicker end) ; Inner Diameter (mm), 320.000 ; Outer Diameter (mm), 360.000 ; Width (mm), 225.000.

aoh 3168 g - skf - standard accessories - factory new! - eBay

Find many great new & used options and get the best deals for AOH 3168 G - SKF - STANDARD ACCESSORIES - FACTORY NEW! at the best online prices at eBay!

AOH 3168 G - SKF - Standard Accessories - Factory New!

AOH 3168 G - SKF - Standard Accessories - Factory New! ... Power Transmission Products; ›; Bearings, Balls & Bushings; ›; Ball Bearings. $7,748.20$7,748.20.

AOH 3168 G - Withdrawal sleeves - SKF

Withdrawal sleeves are slit tapered sleeves that are used to mount bearings with a tapered bore onto the cylindrical seat of stepped shafts. This AOH(X) ...

AOH 3168 G Withdrawal sleeves - HSP Schwahlen GmbH

The bearing can be made to fit the shaft properly by pressing the bearing onto the adapter sleeve or pressing the withdrawal sleeve into the bearing bore.