JTEKT Corporation(Koyo)
- Needle roller bearings
- HK 4516 BND 001 - Drawn cup needle roller bearings
HK 4516 bearing | Needle roller bearings
HK 4516 PDF download| Price： | enquiry |
| Model Number： | HK 4516 |
| R： | HK 4516 |
| ORDER： | 6300 |
| NO： | 5600 |
| FW： | 5.100 |
| D： | 43.000 |
| DESIGNATION | HK 4516 |
| FW | 45.000 mm |
| D | 52.000 mm |
| C | 16.000 mm |
| LOAD1 | 20.500 kN |
| LOAD2 | 43.000 kN |
| LOAD3 | 5.100 kN |
| SPEED1 | 5600 r/min |
| SPEED2 | 6300 r/min |
| No. | R | ORDER | NO | FW | D | CU |
|---|---|---|---|---|---|---|
| SCJ1/2 | 1.04 lb0.470 Kg | 76.20 mm3.000 in | 76.2 mm3.000 in | 1070 lbf4700 N | 1/2 in12.7 mm | Standard |
| 6004/Z | 0.070 Kg | 0.600 mm | 12.000 mm | 42.000 mm | 25000 rpm | 17000 rpm |
| RA450190BLN1PHH1AL+(16.2) | RA45BL | Special High carbon steel | 16.2 | - | - | - |
| 7218BDF FY | 90 | 2.0 | 7218BDF FY | 3800 | 2800 | 160 |
| NU2356 | 280 | 6.0 | 6.0 | NU2356 | 222.000 | 1 100 |
| 6919ZZ | 95 | 1.1 | 6919ZZ | 4800 | 130 | 1.65 |
| M667947ADW/M667910 | 6.3749 in161.922 mm | M667900 | 0.080 in2.00 mm | Spacer shows standard nominal .01 radii, actual bearing may vary | Imperial | 21.5000 in546.100 mm |
| 2MMC9105WI | 0.60 mm0.024 in | 0.60 mm0.024 in | 74160 rpm | 37080 rpm | 6.350 mm1/4 in | METRIC |
| 7200BDB | 10 | 0.3 | 0.6 | 18000 | 14000 | 7200BDB |
| KT 303517 | 30 | KT 303517 | 20.0 | 30 | 35 | 18700 |
Needle Sleeve (HK 4516) - SKF - MISUMI
Needle Sleeve of SKF,HK 4516, Check out the variety of configurable, ... The HK 4516 is included in our offerings for SKF Roller Bearings and our full line ...
SKF HK 4516 - Needle Non Thrust Roller Bearings
45MM Bore; 52MM Outside Diameter; 16MM Width; Needle Roller Bearing; Roller Assembly with Outer Ring - No Inner Ring; Open; Not Self Aligning; Retainer; Single ...
SKF Bearings - HK 4516 - Allied Electronics
HK 4516 from SKF Bearings at Allied Electronics & Automation.
SKF HK 4516, Drawn cup needle roller bearings - I4Mart
SKF needle roller bearings with machined rings are made of carbon chromium bearing steel. SKF supplies these bearings with or without flanges on the outer ring, ...
SKF HK 4516, Needle Roller Bearing, 45mm Bore, 52mm ...
225963 New In Box, SKF HK 4516 Needle Roller Bearing, 45mm Bore, 52mm OD, 16mm Width. Item is New, unused, in factory packaging that may have been opened.
SKF HK 4516 45mm I.D Needle Roller Bearing, 52mm O.D
SKF Drawn cup needle roller bearings have a deep drawn, thin-walled outer ring with open ends (indicated by the HK prefix).,They are characterised by very low ...
HK 4516 - Needle roller bearings - SKF
Drawn cup needle roller bearings are typically used in applications where the housing bore cannot be used as a raceway for a needle roller and cage assembly ...
SKF HK 4516 45mm I.D Needle Roller Bearing, 52mm O.D
SKF HK 4516 45mm I.D Needle Roller Bearing, 52mm O.D ; Number of Rows, 1 ; Dynamic Load Rating, 20.5kN ; End Type, Open ; Fatigue Limit Load, 5.1kN ; Maximum Speed - ...
SKF | HK 4516 | NEEDLE BRGS | Applied
Shop SKF HK 4516 at Applied.com, which includes; Radial Bearing Type, 45 mm Inside Diameter, 52 mm Outside Diameter, 16 mm Width.
Drawn cup needle roller bearings with open ends HK 4516
The drawn cup needle roller bearings with open ends of the HK series consist of a thin outer ring and a needle cage. The needle cage consists of a sheet steel ...
