Tapered Roller Bearings - TS (Tapered Single)

JM718149A/JM718110 bearing | Tapered Roller Bearings/TS (Tapered Single) Metric

Buy Now
Contact Now

Price：	enquiry
Model Number：	JM718149A/JM718110
Series：	35.000 mm1.3780 in
r - Cup Backface "To Clear" Radius²：	M718100
Design Units：	2.54 mm0.1 in
Db - Cup Backface Backing Diameter：	6.100 mm0.24 in
da - Cone Frontface Backing Diameter：	138

Series	M718100
Cone Part Number	JM718149A
Cup Part Number	JM718110
Design Units	METRIC
Bearing Weight	2.1 Kg4.7 lb
Cage Type	Stamped Steel
d - Bore	90 mm3.5433 in
D - Cup Outer Diameter	145.000 mm5.7087 in
B - Cone Width	34.000 mm1.3386 in
C - Cup Width	27 mm1.063 in
T - Bearing Width	35.000 mm1.3780 in
R - Cone Backface "To Clear" Radius¹	6.100 mm0.24 in
r - Cup Backface "To Clear" Radius²	2.54 mm0.1 in
da - Cone Frontface Backing Diameter	99.06 mm3.9 in
db - Cone Backface Backing Diameter	112.01 mm4.41 in
Da - Cup Frontface Backing Diameter	138.94 mm5.47 in
Db - Cup Backface Backing Diameter	131.06 mm5.16 in
Ab - Cage-Cone Frontface Clearance	4.6 mm0.18 in
Aa - Cage-Cone Backface Clearance	1.5 mm0.06 in
a - Effective Center Location³	-2 mm-0.08 in
C90 - Dynamic Radial Rating (90 million revolutions)⁴	57700 N13000 lbf
C1 - Dynamic Radial Rating (1 million revolutions)⁵	222000 N50000 lbf
C0 - Static Radial Rating	313000 N70500 lbf
C_a90 - Dynamic Thrust Rating (90 million revolutions)⁶	43900 N9860 lbf
K - Factor⁷	1.31
e - ISO Factor⁸	0.44
Y - ISO Factor⁹	1.35
G1 - Heat Generation Factor (Roller-Raceway)	138
G2 - Heat Generation Factor (Rib-Roller End)	35.1
Cg - Geometry Factor¹⁰	0.0946

No.	Series	r - Cup Backface "To Clear" Radius²	Design Units	Db - Cup Backface Backing Diameter	da - Cone Frontface Backing Diameter	D - Cup Outer Diameter
UCFH203D1	UCFH203D1	M5x0.8	17	12.7	UC203D1	10
6326/C3	15.30 Kg	4.000 mm	58.000 mm	280.000 mm	4600 rpm	3300 rpm
33214U	41.00	70	1.5	2.0	33214U	2.10
93800D/93125V	4.8749 in123.822 mm	93000	0.060 in1.50 mm	Spacer shows standard nominal .01 radii, actual bearing may vary	Imperial	12.5000 in317.500 mm
NS200072JMN1KCZ1AL+(6)	6.0	-	-	-	-	-
81206 TN	4800	2400	134.000	50.000	16.000	7.500
SAF 22538 6/7/8	LOR 154	Triple Ring Seal	SAF538 x 6-7/8	15.6875 in	SAF225386-7/8	21.6250 in
7332CDF FY	160	4.0	7332CDF FY	3200	2400	340
24132EXQ	160	2.1	25.50	2500	2000	270
6206/ZZ	0.2 Kg	1.000 mm	16.000 mm	62.000 mm	16000 rpm	11000 rpm

JM 718149 A/110 - Tapered roller bearings - SKF

Single row tapered roller bearings are designed to accommodate combined radial and axial loads and provide low friction during operation.

jm718149a/jm718110 - Timken Taper Roller Bearing

Bearing JM 718149 A/JM 718110, specifications - Fersa

Technical details for bearing JM 718149 A/JM 718110. Bearing type, size, inner and outer diameter, weight, OEM references, manufacturer/brand part number ...

JM 718149 A/JM 718110 Single row inch tapered roller ...

Single row inch tapered roller bearings JM 718149 A/JM 718110, 2.08 kg Bearing mass, (90*145*35 mm), 90 mm d (Bore: diameter of the inner ring), ...

JM718149A-JM718110-Q-SKF - Tapered roller bearing

Tapered Roller Bearing JM718149A-JM718110-Q-SKF SKF, Inner diam. 90 mm, Outer diam. 145 mm, Width 35 mm, material N/A. See the data sheet.

Part Number JM718149A - JM718110, Tapered Roller Bearings

This is the most basic and most widely used type of tapered roller bearing. It consists of two main separable parts: the cone (inner ring) assembly and the ...