Tapered Roller Bearings - TS (Tapered Single)

JW7049/JW7010/SA bearing | Tapered Roller Bearings/TS (Tapered Single) Metric

Buy Now
Contact Now

Price：	enquiry
Model Number：	JW7049/JW7010/SA
Series：	39.000 mm1.5354 in
r - Cup Backface "To Clear" Radius²：	JW7000
Design Units：	3.05 mm0.12 in
Db - Cup Backface Backing Diameter：	3.050 mm0.12 in
da - Cone Frontface Backing Diameter：	85.2

Series	JW7000
Cone Part Number	JW7049
Cup Part Number	JW7010-SA
Design Units	METRIC
Bearing Weight	2.6 Kg5.8 lb
Cage Type	Stamped Steel
d - Bore	70 mm2.7559 in
D - Cup Outer Diameter	140.000 mm5.5118 in
B - Cone Width	35.500 mm1.3976 in
C - Cup Width	27 mm1.063 in
T - Bearing Width	39.000 mm1.5354 in
R - Cone Backface "To Clear" Radius¹	3.050 mm0.12 in
r - Cup Backface "To Clear" Radius²	3.05 mm0.12 in
da - Cone Frontface Backing Diameter	82.04 mm3.23 in
db - Cone Backface Backing Diameter	95 mm3.74 in
Da - Cup Frontface Backing Diameter	134.10 mm5.28 in
Db - Cup Backface Backing Diameter	117.09 mm4.61 in
Ab - Cage-Cone Frontface Clearance	5.3 mm0.21 in
Aa - Cage-Cone Backface Clearance	4.3 mm0.17 in
a - Effective Center Location³	8.6 mm0.34 in
C90 - Dynamic Radial Rating (90 million revolutions)⁴	62600 N14100 lbf
C1 - Dynamic Radial Rating (1 million revolutions)⁵	241000 N54200 lbf
C0 - Static Radial Rating	257000 N57800 lbf
C_a90 - Dynamic Thrust Rating (90 million revolutions)⁶	92800 N20900 lbf
K - Factor⁷	0.67
e - ISO Factor⁸	0.87
Y - ISO Factor⁹	0.69
G1 - Heat Generation Factor (Roller-Raceway)	85.2
G2 - Heat Generation Factor (Rib-Roller End)	23.4
Cg - Geometry Factor¹⁰	0.0984

No.	Series	r - Cup Backface "To Clear" Radius²	Design Units	Db - Cup Backface Backing Diameter	da - Cone Frontface Backing Diameter	D - Cup Outer Diameter
6302/2RZ/C3	0.080 Kg	1.000 mm	13.000 mm	42.000 mm	24000 rpm	16000 rpm
581D/574	3.1875 in80.963 mm	575	0.060 in1.50 mm	Spacer shows standard nominal .01 radii, actual bearing may vary	Imperial	5.5115 in139.992 mm
24032KEMW33C3	2.27	3.45	2.32	1800	1500	2.00 mm0.080 in
BA 1614Z	25.400	BA 1614Z	31.0	25.400	31.750	16900
24056RHA	4.0	24056RHA	950	710	420	287
KT 202614EG	20	KT 202614EG	13.8	20	26	13000
24048CK30E4	24048CK30E4	43.40	360	2.3	3.4	2.2
NK21/20R	0.30	NK21/20R	0.0350	19000	13000	29
LY200086BLN1P##---+(13)	LY20BL	13.0	-	-	-	-
22244EMBW507C08C3	2.45	3.73	2.51	1500	1300	3.00 mm0.120 in

Konusni valjkasti ležaj JW7049 / JW7010 jednostruki red ...

Sa bogatim iskustvom u ovoj oblasti, bili smo poznati po kvaliteti, vrijednosti i dobroj usluzi. ... Jednostruki konusni valjkasti ležajevi JW7049 / JW7010, ...

JW7049/JW7010 Timken Tapered Roller Bearing ...

JW7049/JW7010 Timken Tapered Roller Bearing 70x140x39mm ... Timken offers the most extensive line of tapered roller bearings in the world. Tapered roller bearings ...

Tapered roller bearing - Wikipedia

Tapered roller bearings are rolling element bearings that can support axial forces as well as radial forces. A single tapered roller bearing.

Tapered roller bearing jw7049-jw7010-timken - 123bearing

Tapered Roller Bearing JW7049-JW7010-TIMKEN TIMKEN, Diamètre intérieur 70 mm, Diamètre extérieur 140 mm, Epaisseur 39 mm, matière N/A. See the data sheet.

jw7049/jw7010 - Timken Taper Roller - Quality Bearings

This jw7049/jw7010 bearing is an imperial taper roller bearing. The bearing's dimensions are 0.1085x0.217x0.0604inch ...

TIMKEN® METRIC TAPERED ROLLER BEARINGS

bearing. Width series. Diameter series. Bore code. The original metric part-numbering system for tapered roller bearings was based on the ISO 15 dimensional ...

Part Number JW7049 - JW7010, Tapered Roller Bearings

This is the most basic and most widely used type of tapered roller bearing. It consists of two main separable parts: the cone (inner ring) assembly and the ...

Bearing Dimension Catalog

SA. Cone & Cup. Special feature bearing. (Non-interchangeable with bearings ... JW7000 Series. †JW7049. 70.000. 35.500. 3.0. 1.69 kg. †JW7010. 140.000.