Tapered Roller Bearings - TS (Tapered Single)

JW7049/JW7010P bearing | Tapered Roller Bearings/TS (Tapered Single) Metric

Buy Now
Contact Now

Price：	enquiry
Model Number：	JW7049/JW7010P
Series：	39.000 mm1.5354 in
r - Cup Backface "To Clear" Radius²：	JW7000
Design Units：	3.05 mm0.12 in
Db - Cup Backface Backing Diameter：	3.050 mm0.12 in
da - Cone Frontface Backing Diameter：	85.2

Series	JW7000
Cone Part Number	JW7049
Cup Part Number	JW7010P
Design Units	METRIC
Bearing Weight	2.6 Kg5.8 lb
Cage Type	Stamped Steel
d - Bore	70 mm2.7559 in
D - Cup Outer Diameter	140.000 mm5.5118 in
B - Cone Width	35.500 mm1.3976 in
C - Cup Width	27 mm1.063 in
T - Bearing Width	39.000 mm1.5354 in
R - Cone Backface "To Clear" Radius¹	3.050 mm0.12 in
r - Cup Backface "To Clear" Radius²	3.05 mm0.12 in
da - Cone Frontface Backing Diameter	82.04 mm3.23 in
db - Cone Backface Backing Diameter	95 mm3.74 in
Da - Cup Frontface Backing Diameter	133.35 mm5.25 in
Db - Cup Backface Backing Diameter	117.09 mm4.61 in
Ab - Cage-Cone Frontface Clearance	5.3 mm0.21 in
Aa - Cage-Cone Backface Clearance	4.3 mm0.17 in
a - Effective Center Location³	8.6 mm0.34 in
C90 - Dynamic Radial Rating (90 million revolutions)⁴	62600 N14100 lbf
C1 - Dynamic Radial Rating (1 million revolutions)⁵	241000 N54200 lbf
C0 - Static Radial Rating	257000 N57800 lbf
C_a90 - Dynamic Thrust Rating (90 million revolutions)⁶	92800 N20900 lbf
K - Factor⁷	0.67
e - ISO Factor⁸	0.87
Y - ISO Factor⁹	0.69
G1 - Heat Generation Factor (Roller-Raceway)	85.2
G2 - Heat Generation Factor (Rib-Roller End)	23.4
Cg - Geometry Factor¹⁰	0.0984

No.	Series	r - Cup Backface "To Clear" Radius²	Design Units	Db - Cup Backface Backing Diameter	da - Cone Frontface Backing Diameter	D - Cup Outer Diameter
61708/C3	0.021 Kg	0.300 mm	6.000 mm	50.000 mm	Open	2.5 kN
JM205149/JM205110V	28.000 mm1.1024 in	M205100	2.54 mm0.1 in	3.050 mm0.12 in	48.2	METRIC
HR2042TUUM+220LM-II (G20g20)	UU- With end seals (on both ends)	No connection	HR2042TM	20.00	-	-
65390/20	44.450	49.212	3.2	3.6	5000	3800
CF 10-1WBUUR	13.80	10	16.0	10	CF 10-1WBUUR	60.0
XDS2SN415-43	A-1/8NPT	XDS2SN415-43	2 11/16	-	-	-
AN-38	AN-38	-	189.7888	28.8290	-	240.6396
SYWK 1. YTH	4300	7.8	11.9	SYWK 505 Y	SYWK 1. YTH	YAR 205-100-2RF/HV
E/P4B/TRB/80MM/ECO	2.07	1.71	0.7	0.87	47 lb	0883450507684
AN 34/W 34	6.76 mm0.266 in	8	19.05 mm0.750 in	18.16 mm0.715 in	164.69 mm6.484 in	171.81 mm6.764 in

JW7049/JW7010 Tapered roller bearing 70x140x39mm

JW7049/JW7010 Tapered Roller Bearing 70x140x39mm ; Inside Diameter: 70mm mm ; Outside Diameter: 140mm mm ; Thickness: 39mm mm ; Weight: 1 KG ; Brand: as your ...

timken JW7049P/JW7010P Tapered Roller Bearings Tapered ...

Buy timken JW7049P/JW7010P Tapered Roller Bearings Tapered Single Metric from Skateboard Bearings Corporation Japan，Tapered Roller Bearings Tapered Single ...

Part Number JW7049 - JW7010, Tapered Roller Bearings

This is the most basic and most widely used type of tapered roller bearing. It consists of two main separable parts: the cone (inner ring) assembly and the ...

JW7049P/JW7010P bearing | Tapered Roller Bearings/TS ...

JW7049P/JW7010P bearing | Tapered Roller Bearings/TS (Tapered Single) Metric ; Series：, 39.000 mm1.5354 in ; r - Cup Backface "To Clear" Radius2：, JW7000.

Tapered roller bearing jw7049-jw7010-timken - 123bearing

Tapered Roller Bearing JW7049-JW7010-TIMKEN TIMKEN, Diamètre intérieur 70 mm, Diamètre extérieur 140 mm, Epaisseur 39 mm, matière N/A. See the data sheet.